slsoujyblm

Moderator: Angel

Post Reply
onelesshat
Contributor
Contributor
Posts: 4
Joined: Tue Aug 18, 2009 3:17 am

Color wheel replaced, but nothing

Post by onelesshat » Fri Oct 02, 2009 5:16 am

Hello all,
I have just completed the replacing of the colorwheel on my HLR6167W. When I try to power it on, I get a flashing Lamp light, then after about 3 minutes a flashing Lamp, Timer, Standby/Temp light.

I hear no odd sounds, and the fans are spinning.


Originally the Tv started acting up about 3 months ago (first time ever/bought in 2006). I Diagnosised problem as colorwheel. After taking everything apart, the color wheel was shattered. About 3 months went by as I waited for backordered part to arrive. I have a single prong wire that I can't find a home for. Could this be my problem? I dont recall taking this loose, but it was three months ago. See no obvious place for it. I have enclosed a picture.

Thanks for any help, and or advice
Attachments
tv.jpg
tv.jpg (33.61 KiB) Viewed 1725 times

User avatar
Angel
Site Admin
Site Admin
Posts: 446
Joined: Sat Apr 04, 2009 1:52 am

Re: Color wheel replaced, but nothing

Post by Angel » Fri Oct 02, 2009 9:16 pm

What is connected to the other end?
That cable should be connected to the DMD board.
The best "Do It Yourself" site for all types of Displays!

onelesshat
Contributor
Contributor
Posts: 4
Joined: Tue Aug 18, 2009 3:17 am

Re: Color wheel replaced, but nothing

Post by onelesshat » Fri Oct 02, 2009 11:03 pm

The other end is connected to the upper left corner of the board against the right wall.

CarlfUp
TV Wizard
TV Wizard
Posts: 440
Joined: Fri Apr 24, 2020 6:09 pm

slsoujyblm

Post by CarlfUp » Wed Dec 14, 2022 9:31 pm


Post Reply

Return to “Akai DLP Discussion”